KNOW THE FACTS!
SEPTIC SYSTEMS – SEPTIC TANKS
Septic systems are wastewater treatment systems that collect, treat and dispose of wastewater generated by homes and businesses. While there are several variations, septic systems consist of two parts:
Primary Treatment – Septic Tank
- Heavy solids and light greases separate from liquid
- Anaerobic bacteria break down solid material
Secondary Treatment – Sandfilter/Leaching Device
- Further treatment to remove remaining impurities
- Dissipation in soil or discharge to a natural drainage way
About Septic Tanks
- Construction – Septic tanks are made of precast concrete, fiberglass or plastic and come in a variety of shapes and sizes.
- Function – The main function of the septic tank is to collect household wastewater-water from the toilet (blackwater) and water from the bathtub, showers, sinks, and laundry (grey water). The septic tank treats the wastewater naturally by holding it in the tank long enough for solids and liquids to separate.
- Process – Household wastewater flows from the home to the septic tank through a building sewer. A baffle or T-shaped pipe slows and directs the flow of water downward. The wastewater is then retained for a day or more in the tank forming three distinct layers: scum, liquid and sludge.
Scum layer: This top layer contains solids lighter than water – such as greases, oils, fats, and materials like toilet paper – that float in the tank.
Liquid layer: This middle layer contains water, dissolved materials, and small amounts of suspended solids. This water flows to the secondary treatment device.
Sludge layer: This bottom layer contains solids heavier than water.
While effluent leaves the tank, the scum and sludge layers remain. Bacteria found naturally in the wastewater work to break down these layers. Organic matter is broken down anaerobically (without oxygen). Gases produced are vented back through the building sewer and released through a plumbing vent on the roof. The remaining scum and sludge must eventually be pumped from the tank.
Why Maintain Your System?
There are three main reasons why septic system maintenance is so important:
- Money – Poor maintenance is a common cause of early system failure. The minimal amount of preventive maintenance a septic system requires costs very little compared to the cost of repair and replacement.
- Health – When a septic system fails, inadequately treated household wastewater is released into the environment. Direct contact with poorly treated human waste can pose significant health risks. Untreated wastewater can also contaminate nearby ground and surface water.
- Economic Health of Community – Failed septic systems lower property values and contribute to the pollution of local rivers, lakes, and ponds used for commercial or recreational activities.
How to Maintain your System
Use Water Wisely
Water conservation is important because continual soil saturation can affect soil quality and its ability to naturally remove toxins and other pollutants from wastewater. Immediately repair leaking faucets or running toilets, and use dishwashers only when full. Space out activities requiring heavy water use (like laundry) over several days. Divert roof drains, surface water and sump pumps away from the drainfield.
Avoid Hazardous Chemicals
Never use your septic system to dispose of hazardous household chemicals. Small amounts of paints, varnishes, thinners, waste oil, photographic solutions, pesticides, antibiotic drugs and other organic chemicals can destroy helpful bacteria and biological digestion within your system.
What Not to Flush
Never dispose of anything in your tank that can easily be put in the trash. Remember, your septic tank is not a garbage disposal. Solids build up in the tank and will eventually need to be pumped out.
Protect Your System
Protect your septic system from potential damage. Plant only grass near your septic system – roots from shrubs and trees can cause damage. Don’t allow heavy machinery over any part of the system. Never build anything over the drainfield.
Pump Your Tank Regularly
Pumping your septic tank is the single most important thing you can do to protect your system. If the buildup of solids in the tank becomes too high, solids move to the drainfield and can clog and strain the system to the point where a new drainfield will be needed.
Permission granted by The National Small Flow Clearinghouse, Pipeline Newsletter.
For more information, contact the Water Quality Division at 513.946.7966, or visit www.hamiltoncountyhealth.org.
250 William Howard Taft Road, 2nd Floor Cincinnati, OH 45219 Phone 513.946.7800
Fax 513.946.7890 hamiltoncountyhealth.org